Congleton: 01260 270 817
Warrington: 01925 599080
Weight: 23,040kg
Height: 3,508mm
Width: 2,950mm
Length : 10,547mm
Max load capacity 25,000kg
Heaped capacity 15m3
Rear tipping
Wide floatation tyre
Turning radius 7,470mm

Hire a Cat 725 Dump Truck

Hire a Cat 725 Dump Truck. Already an excellent dump truck, the designers at Cat have taken all the positives of the Cat 725C2 and created an even better model in the Cat 725. Enhancements include new cab, controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Key Features of the Cat 725 dump truck

  • Cat 9.3 ACERT diesel engine
  • EU Stage 5 compliant
  • Six-wheel drive
  • Auto-shift transmission with six-speed
  • Retarder, engine compression brake
  • ASHBROOK models have wider tyres than standard (in fact, they’re the same as on the 730)- 750 65R 25 Michelins
  • Machine speed limiter
  • Hill assist
  • Waiting brake
  • Cat detect with stability assist
  • Automatic traction control
  • Air conditioner including heater/ defroster
  • Back up alarm & back up lights
  • Roof-mounted work lights
  • Rear colour camera
  • Rotating amber beacon
  • Secondary steering- electro-hydraulic
  • Front spill guard
  • Scissor tailgate
  • Cat Product link

View pdf product specification sheet for full details or ask our knowledgeable staff if you have a need for a specific function.

On-site capabilities and new technologies

With a rated payload of 24t and a heaped capacity of 15m3, this high-spec dump truck will get the job done. Not only will it do that, but it will also do it with improved performance versus previous models. The Cat 725 has increased productivity brought about by improved acceleration and speed performance on grades, meaning that the job can be done more quickly and efficiently.

This dump truck for hire comes with advanced automatic traction control (AATC). This is the proactive application of the inter and cross-axle differential locks, it works ‘on-the-go’ and is fully automatic. Thus, bringing with it the benefit of the operator not needing to think about when and where to engage either diff lock. The operation of the AATC has been tried and tested to be seamless and smooth, eliminating wheel slip and giving the machine maximum traction and, consequently, productivity.

Improved machine safety and reduced cycle times are delivered through the use of the automatic retarder control (ARC) because it helps to eliminate engine overspeed. This clever piece of design technology ensures that the engine compression brake is automatically engaged to control machine speed when descending a grade. But don’t worry, the operator still has the flexibility of manual control if necessary.

To assist the operator further this 25t dump truck comes with new Assisted Hoisting Control. This means that the tipping of the dump body can be done automatically. It covers everything from applying the brakes, switching the transmission to neutral, raising the body at the required engine rpm, to the reverse action.

Eliminate the risk of roll-back on grades with Hill Assist. This function ensures that if the operator were to lift their foot off the service brake, the machine will automatically hold the service brake in place to prevent it from rolling backwards. An excellent safety feature on hilly sites.

In addition, the waiting brake applies the service brakes when neutral gear is selected. Another handy safety feature which ensures easy control of the machine at the load or dump area and helps to reduce operator fatigue.


The EU Stage V Cat engine will ensure that emissions are kept to a minimum on-site through a careful balance of proven air, fuel, electronic and after-treatment components. In addition, the Cat 725 also delivers better fuel economy and advanced MEUI-C injector platforms deliver increased pressures and more precise fuel rates. Thus, enhancing responsiveness while controlling soot, and great for the budget and the environment!

Gear changes are smooth with the Cat CX31 transmission. This six-speed forward motion and single reverse transmission features Advanced Productivity Electronic Control Strategy (APECS) and Electronic Clutch Pressure Control (ECPC). These come together to deliver smooth gear changes with improved acceleration and higher productivity versus previous models.

Operator comfort

The new cab in this Cat 725 is specifically designed to make all elements of machine operation as simple as possible, no matter what the experience level of the operator. The gauges and controls are straightforward to use and easy to read. With automatic and manual options for many of the functions, it really is the dump truck for all.

The dash-mounted touchscreen display has been updated and allows the operator to monitor and manage various levels of the machine performance. These include operator and machine totals, configuration settings, stability assist, various machine status parameters, and the video feed from the rear-view camera.

The spacious cab provides a comfortable working space for two people. In addition, the new air suspension seat gives an increased adjustment range versus previous models. This includes fore/aft isolation which has the effect of greatly reducing horizontal vibrations and jolts. Thus, supporting a more comfortable operating environment.

A final improvement to mention is the automatic climate control system which gives the operator the option to maintain the temperature to their desired level.

All pictures are for illustration purposes only. Hence, machines may vary depending on the specification ordered.

What does CAT say about the 725 Dump Truck?

How to hire?

Hire a CAT 725 by contacting our hire desks today or click the ‘Get a Quote’ button to receive an online quotation.

Need something larger? Then we also have the Cat 730 available. Smaller options offered by ASHBROOK would come from our Site Dumper range.