Congleton: 01260 270 817
Warrington: 01925 599080
Weight: 18,456
Width (standard shoes with blade): 3,000mm
Blade width: 4,080mm
Width over blade (transport): 3,699mm
Net power (ISO 14369) 133kW
Blade capacity 3.9m3
Max travel speed 9.8km/h
VPAT blade | High drive | LGP tracks

Hire a Cat D6N LGP Bulldozer

Hire a Cat D6N LGP bulldozer with a 6-way VPAT blade and LGP tracks. The fundamental difference between the Cat D6K2 and this Cat D6N bulldozer is the design of the tracks. The D6N comes with high drive, meaning that the final drive and drive sprocket is set significantly above the ground. The impact of which is extra stability on uneven terrain and steep grades.

Key Features of the CAT D6N LGP Bulldozer

  • 1 ACERT Tier 4 Final/ Stage IV diesel engine
  • Eco-mode
  • Variable Pitch Angle Tilt (VPAT) blade
  • Low Ground Pressure (LGP) tracks
  • High Drive
  • Lock-Up Clutch for increased productivity and efficiency
  • Enhanced Auto-Shift
  • Differential Steering
  • Load Sensing Hydraulics
  • Programmable/selectable bi-directional shifting
  • Engine Idle Shutdown
  • Auto Engine Speed Control
  • Three value hydraulics
  • Cat GRADE with Slope Assist
  • PRODUCT LINK enabled
  • Cat Stable blade
  • Cat Slope Indicate
  • Cab with integrated Roll-Over Protective and Falling Object Protective Structures (ROPS and FOPS).
  • Integrated A/C with Automatic Temperature Control
  • Air suspension seat
  • Colour 7inch liquid crystal display (LCD) for monitoring
  • Adjustable operator controls/armrests

View pdf product specification sheet for full details or ask our knowledgeable staff if you have a need for a specific function.

Bulldozer engine and design

The Cat D6N LGP bulldozer comes with a Cat C7.1 ACERT engine that complies with Tier 4 Final/ Stage IV diesel engine emission standards. In addition, Enhanced Auto Shift helps the operator save fuel by automatically shifting up and down the gears to utilise the most efficient one based on load.

Benefit from differential steering. This function maintains full power to both tracks for market-leading turning, even with a full blade load.

Idling is a big drain on site costs, thus the Cat D6N comes with an engine idle shutdown function. This works by shutting down the engine after a specific time. Therefore, offering fuel-saving and supporting on-site environmental targets.

Dozer Technology

Like the Cat D6K2, the D6N bulldozer comes supplied with marketing-leading technology options. Thus supporting operators of all experience levels.

The bulldozer is supplied with:

  • Cat Grade with Slope Assist, this automatically maintains the operator’s pre-established blade position without a GPS signal. Put it to work building pads, creating simple design plans on the go, or working where GPS is unavailable.
  • Slope indicate shows machine cross-slope and fore/aft orientation right on the main display to help operators with slope work.
  • Stable Blade has been improved to make it even easier to get smoother surfaces faster when operating manually. It works seamlessly with operator blade inputs to help reduce imperfections and produce a smoother surface.
  • PRODUCT LINK takes the guesswork out of equipment management.
  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica.

If you have any additional technology needs, talk to the ASHBROOK team to confirm what can be provided.

Operator Comfort

The Cat D6N has a roomy and comfortable cab. It comes with a manually adjustable armrest, large cup holder, and auxiliary power port for phone charging and similar activities. For ease-of-use electro-hydraulic controls have been installed. The purpose of these controls is to allow the operator to have precise control of the blade and rear attachments, as well the 6-way VPAT blade.

To help provide the operator with a comfortable environment the cab seals and ducts have been modified to improve heating and cooling performance. In addition, to the seals and ducts, the fresh air filter help keeps the cab cleaner and a more pleasant operating environment than in previous models.

Technology is at the operator’s fingertips with the LCD display that shows vital operating details, as well as Slope Indicate real-time machine mainfall and cross slope.

For the full list of operator station controls, see the pdf specification sheet.

All pictures are for illustration purposes only. Hence, machines may vary depending on the specification ordered.

How to hire?

Hire a Cat D6N LGP bulldozer by contacting our hire desks today or click the ‘Get a Quote’ button to receive an online quotation.

If you require a slightly larger model, we also have the Cat D6 Next Generation bulldozer on fleet.